It couldn't be easier to disable auto start/stop on your Subaru Crosstrek. This intelligent device restores your preference for auto start-stop automatically which eliminates the need to press the disable auto stop button after each ignition cycle.
Click the Installation tab above to check out the installation and demonstration video.
The device simply plugs into the overhead stereo camera on your 2024 Subaru Crosstrek in the same way it's shown in the Subaru Outback video below.
I wish I could have gotten a discount on the replacement I had to order when I changed vehicles
Other than that Eliminator works Great!
Works just as advertised and installation was easier than I would have imagined
This product works perfectly. Reading the reviews of others provided additional assistance with the installation. You no longer have to remember to disable the feature after every start cycle. A great product that stops this nuisance feature on most newer models. In addition, it does not create any error codes on the car. Well worth the price.
Absolutely perfect. It works exactly as described and installs in just a couple of minutes.
First let me say that I tried to upload 7 images but was limited to 5. The review from Jeff P is all you need, but some additional clarification may be helpful
You are targeting the small panel on the windshield side of the SOS button. You could use a panel tool or some type of thin plastic flat blade style device - you do not want to pry off plastic panels with a metal flat blade screwdriver because you will mar the surface.
Just stick the tool between the panel and surrounding area and pry it off - I provided a picture of both sides of this piece so you can see what you are prying against.
Once that is off - take out the two phillips screws and pry that whole piece down - there are two pins towards the back of teh car that are holding the back in, just pry between the headliner and the piece and it will drop - image shown of that.
Then as the other instructions say give gentle hits to the back of the eyesight cover towards the front of the car. There are two clips you are popping out. Image of that pieces shown as well.
Then attach the start/stop eliminator and either secure it with the zip ties or I used velcro straps.
Then reverse the process to reassemble it, The eyesight pice just takes a tap on it from the front to the back of the car and it sill snap in place.
It really is fairly easy - turn off you brain thinking that you will break a panel or hurt the car. Best thing is it actually works.
I also have a Jeep Gladiator and just ordered one for that vehicle since I am sick of having to turn that off first thing when I start them.
